Hubbardton-forge 335796 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 335796. Hubbardton Forge 335796 User Manual [en]

  • Download
  • Add to my manuals
  • Print
  • Page
    / 1
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
Installation Instructions G15
Hand-Forged, Vermont-Made Lighting and Accessories
154 Route 30 South, Castleton, Vermont 05735
27222
Banded Post and Pier Mounted 33-5786, 33-5796 & 33-5796F Page 1 of 1
Note: Fixture, Post and Cover Cap each sold separately
Component Parts
A Glass
B Fixture
C Fixture Collar
D Set Screw
To Install
Caution: Be sure power is off at the main breaker box prior to
installation.
Note: Post may be cut to length as desired before installation
begins.
1. Connect fixture wires to supply wires using appropriate
wire connectors (not provided), black to black, white to
white and bare copper or green to bare copper or green. If
fixture is wired with twin lead lamp cord, connect smooth
side of fixture wire to black and ridged side to white.
2. For 33-5796 (square post) only, install rubber adhesive
strips centered on each inside wall of the fixture collar (C).
3. Place fixture (C) onto post carefully tucking all wiring
down into post and making sure no wires are pinched
between the post and the fixture. Secure with set screw (D)
using a 1/8” hex key wrench (not supplied).
4. Install 150-watt max type ‘A’ light bulb and glass (A).
Note: The glass is mouth blown. Minor irregularities,
including being slightly out of square, are normal. It may be
necessary to turn the glass in relation to the fixture to
achieve a good fit.
5. Restore electricity to breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL
INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.
This product must be installed in accordance with applicable installation code(s), by a person familiar with the
construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum watta
g
e noted on fixture. Use onl
y
recommended bulbs with fixture.
Page view 0
1

Summary of Contents

Page 1 - 27222

Installation Instructions G15 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route 30 South, Castleton, Vermont 05735 27222 Banded Post

Comments to this Manuals

No comments