Hubbardton-forge 365710 User Manual download pdf

Installation Instructions A319

Modern Prairie Chain Hung 36-5705 & 36-5710 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

27926

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Canopy Loop

G Loop Collar

H Fixture Loop

I Chain

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar (B) to the

electric box.

Note: A new electric box comes with screws. When replacing a fixture,

retain the existing screws for use with the new fixture.

3. Thread the nipple (D) into the crossbar (B) and secure with lock nut (C).

Slide canopy (E) over nipple (D), and attach the canopy loop (F) to the

nipple (D). Thread loop collar (G) onto canopy loop (F). Adjust the

nipple to proper length to ensure a snug canopy fit before proceeding.

4. Remove loop collar (G) and canopy (E) before proceeding with

installation.

5. Attach one end of the chain (I) to the fixture loop (H). Lace the wire

through every other link of the chain to the end. Slip wires and chain

through the collar and canopy (G & E). Fasten the chain to the canopy

loop (F) then slip wires through the loop and nipple, into the electric box.

Make sure to provide enough slack in the wire to ensure weight of fixture

is supported by the chain.

6. Using suitable wire connectors (not provided) connect fixture wires to

supply wires (white to ribbed side of the fixture cord, black to smooth

side). Run a pigtail lead from crossbar ground screw (A) to the junction

box and connect all ground wires (bare copper or green to bare copper or

green).

Caution: Make sure wire connectors are twisted on securely, and no

bare wire is exposed

7. Raise canopy (E) to the ceiling and secure loop collar (G) to canopy

loop (F).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

A319 1
27926 1

Summary of Contents

Page 1 - 27926

Installation Instructions A319 Modern Prairie Chain Hung 36-5705 & 36-5710 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Page 2

Installation Instructions A319 Modern Prairie Chain Hung 36-5705 & 36-5710 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Related models: 365705

Comments to this Manuals

No comments

Hubbardton-forge 365710 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 365710. Hubbardton Forge 365710 User Manual

Summary of Contents

Related models: 365705

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 365710