Hubbardton-forge 345610 User Manual download pdf

Assembly & Installation Instructions G12

Meridian Post-Mount 34-5610 Page 1 of 4

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

26970 Rev A

Note: Fixture, Post and Cover Cap each sold separately

To Install Post (Figure 1)

Component Parts

A J Bolt (4)

B Post

C Flat Washer (4)

D Split Washer (4)

E Hex Nut (4)

F Cover Cap (optional)

G Set Screw

H Fixture

Caution: Be sure power is off at the main breaker box prior to installation.

Site Preparation

1. Run appropriate wiring to the site of the fixture, leaving enough excess

wire to reach the top of the post, plus 12 inches.

2. Pour flat and level concrete base with wiring emerging at the center.

Insert J bolts (A) so approximately 1" of the bolts are exposed above the

concrete. Position J bolts according to the template on the last page of

these instructions. Allow concrete to cure before installing fixture.

Installation

Note: Post may be cut to desired height before installation.

1. Position post over J bolts allowing supply wire to run up though the post

and secure using flat washers (C), split washers (D) and hex nuts (E).

2. Place cover cap (sold separately) (F) over post to conceal mounting

hardware.

3. Connect fixture wires to supply wires using appropriate wire connectors

(not provided), black to black, white to white and bare copper or green

to bare copper or green. If fixture is wired with twin lead lamp cord,

connect smooth side of fixture wire to black and ridged side to white.

4. Place fixture (H) onto post carefully tucking all wiring down into post

and making sure no wires are pinched between the post and the fixture.

Secure with set screw (G).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2 3 4

Summary of Contents

Page 1 - To Install Post (Figure 1)

Assembly & Installation Instructions G12 Meridian Post-Mount 34-5610 Page 1 of 4 Hand-Forged, Vermont-Made Lighting and Accessories 154 Ro

Page 2 - 26970 Rev A

Assembly & Installation Instructions G12 Meridian Post-Mount 34-5610 Page 2 of 4 Hand-Forged, Vermont-Made Lighting and Accessories 154 Ro

Page 3

Assembly & Installation Instructions G12 Meridian Post-Mount 34-5610 Page 3 of 4 Hand-Forged, Vermont-Made Lighting and Accessories 154 Ro

Page 4

Assembly & Installation Instructions G12 Meridian Post-Mount 34-5610 Page 4 of 4 Hand-Forged, Vermont-Made Lighting and Accessories 154 Ro

Comments to this Manuals

No comments

Hubbardton-forge 345610 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 345610. Hubbardton Forge 345610 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 345610