Hubbardton-forge 307858 User Manual download pdf

Installation Instructions B137

For Small After Hours Outdoor 30-7858 & 30-7858F Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

21167

To Adjust Top Plate (Figure 1)

Component Parts

A 8-32 x 1/4" Screw

B Top Plate

C Glass

D Bracket

E 8-32 x 3/8” Screw

F Fixture

1. Carefully unpack the fixture from the carton.

2. Slide glass (C) into fixture (F).

3. Slip top plate (B) onto fixture (F) until it rests on top of glass (C).

4. Attach bracket (D) with 8-32 x 3/8" screw. Do not tighten at this point.

5. Raise or lower bracket (D) as needed until it touches top plate (B) and tighten

screw (E).

6. Slip 8-32 x 1/4" screw (A) through top plate (B) and thread in to bracket (D) and

tighten. Be careful not to over tighten.

7. Remove screw (A), top plate (B) and glass (C) and set to the side temporarily.

8. Continue with installation instructions below.

To Install Fixture

(Figures 2 & 3)

Component Parts

F Fixture

G Crossbar

H 8-32 x 1 5/8” Screw (2)

Caulking Lip

Caution: Be sure power is off at the main breaker box prior to installation.

Using two machine screws (not provided) attach cross bar (G) to the electric

box using inside oval holes to orient fixture.

Note: A new electric box comes

with screws. When replacing a fixture, retain the screws for use with the new

fixture.

2. Using suitable wire connectors (not provided), connect the fixture wires to

the supply wires, (white to white, black to black, bare copper or green to bare

copper or green). If the fixture is wired with twin lead lamp cord, connect the

ribbed side to white, and the smooth side to black.

Caution: Make sure wire connectors are twisted on securely and no bare

wires are exposed.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2

B137 1
21167 1

Summary of Contents

Page 1 - 21167

Installation Instructions B137 For Small After Hours Outdoor 30-7858 & 30-7858F Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessori

Page 2

Installation Instructions B137 For Small After Hours Outdoor 30-7858 & 30-7858F Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessori

Comments to this Manuals

No comments

Hubbardton-forge 307858 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 307858. Hubbardton Forge 307858 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 307858