Hubbardton-forge 104815 User Manual download pdf

Installation Instructions A212

For Beacon Hall Four Light Chandelier 10-4815 & 10-4815E Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22850

Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products and

options.

To Install (Figure 1)

Component Parts

A Crossbar

B Lock Nut

C Nipple

D Canopy

E Loop Collar

F Canopy Loop

G Chain

H Fixture Loop

I Fixture

J Ground Screw

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar to the electric

box.

Note: A new electric box comes with screws. When replacing a fixture,

retain the existing screws for use with the new fixture.

3. Thread the nipple (C) into the crossbar (A) and secure with lock nut (B);

slide canopy (D) over nipple, and attach the canopy loop (F) to the nipple.

Adjust the nipple to proper length to ensure a snug canopy fit before

proceeding.

4. Attach one end of the chain to the fixture loop (H). Lace the wire through

every other link of the chain (G) to the end. Slip wires and chain through the

loop collar (E), canopy loop (F) and canopy (D). Fasten the chain to the

canopy loop, then slip wires through the loop and nipple, into the electric

box. Make sure to provide enough slack in the wire to ensure weight of

fixture is supported by the chain.

5. Using suitable wire connectors (not provided) connect fixture wires to supply

wires (white to ribbed side of the fixture cord, black to smooth side). Connect

all ground wires to crossbar ground screw (J).

Caution: Make sure wire connectors are twisted on securely, and no bare

wire is exposed.

6. Raise canopy to the ceiling and secure collar to canopy loop (F) with loop

collar (E).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

(Figure 1)

1 2

A212 1
22850 1

Summary of Contents

Page 1 - 22850

Installation Instructions A212 For Beacon Hall Four Light Chandelier 10-4815 & 10-4815E Page 1 of 2 Hand-Forged, Vermont-Made Lighting and A

Page 2

Installation Instructions A212 For Beacon Hall Four Light Chandelier 10-4815 & 10-4815E Page 2 of 2 Hand-Forged, Vermont-Made Lighting and A

Comments to this Manuals

No comments

Hubbardton-forge 104815 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 104815. Hubbardton Forge 104815 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 104815