Hubbardton-forge 133303 User Manual download pdf

Assembly & Installation Instructions A247

Kirigami Three Light Pendant 13-3303 Page 1 of 4

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

24617 Rev A

Prepare the Canopy (Figure 1)

Component Parts

A Jam Nut

B Crossbar

C Threaded Nipple

D Canopy

E Canopy Ring

F Coupling

G Canopy Pipe

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Thread jam nut (A) and crossbar (B) onto threaded nipple (C) leave parts loose.

3. Using two machine screws (not provided), temporarily fasten the crossbar (B)

to the electric box.

Note: A new electric box comes with screws. When replacing a fixture, retain

the existing screws for use with the new fixture.

4. Adjust the length of threaded nipple (C) in crossbar (B) so that canopy ring (E)

will hold canopy (D) against the ceiling with no threads showing for best

appearance. When the correct adjustment is established, tighten jam nut (A)

against crossbar (B) to hold the adjustment.

5. Remove the crossbar and stem from the electrical box and proceed with the

assembly instructions.

To Complete Assembly & Install

(Figures 2 & 3)

Component Parts

A Jam Nut

B Crossbar

C Threaded Nipple

D Canopy

E Canopy Ring

G Canopy Pipe

H Fixture Pipe

I Plastic Clutch Sleeve

J Clutch

K Set Screw

1. Thread wires from the fixture pipe (H) through the canopy

pipe (G).

2. Unscrew the clutch (J) from the canopy pipe (G); slide it across the

wires and onto the fixture pipe (H). Follow this with the plastic

clutch sleeve (I), oriented so the tapered end of the clutch sleeve

nests in the clutch (Figure 2).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

1 2 3 4

A247 1
24617 Rev A 1

Summary of Contents

Page 1 - 24617 Rev A

Assembly & Installation Instructions A247 Kirigami Three Light Pendant 13-3303 Page 1 of 4 Hand-Forged, Vermont-Made Lighting and Access

Page 2

Assembly & Installation Instructions A247 Kirigami Three Light Pendant 13-3303 Page 2 of 4 Hand-Forged, Vermont-Made Lighting and Access

Page 3

Assembly & Installation Instructions A247 Kirigami Three Light Pendant 13-3303 Page 3 of 4 Hand-Forged, Vermont-Made Lighting and Access

Page 4

Assembly & Installation Instructions A247 Kirigami Three Light Pendant 13-3303 Page 4 of 4 Hand-Forged, Vermont-Made Lighting and Access

Comments to this Manuals

No comments

Hubbardton-forge 133303 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 133303. Hubbardton Forge 133303 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 133303