Hubbardton-forge 103047 User Manual download pdf

Installation Instructions A298

Flora Chandeliers 10-3045 & 103047 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

27015 Rev A

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Loop Collar

G Canopy Loop

H Fixture Loop

I Chain

Caution: Be sure power is off at the main breaker box

prior to installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten

the crossbar (B) to the electric box (see

illustration).

Note: A new electric box comes with screws.

When replacing a fixture, retain the existing

screws for use with the new fixture.

3. Thread the nipple (D) into the crossbar (B) and

secure with lock nut (C); slide canopy (E) over

nipple (D), and attach the canopy loop (G) to the

nipple (D). Adjust the nipple to proper length to

ensure a snug canopy fit before proceeding.

4. Attach one end of the chain (I) to the fixture loop

(H). Lace the wire through every other link of the

chain (I) to the end. Slip wires and chain (I)

through the collars and canopy (G, F & E). Fasten

the chain (I) to the canopy loop (G), and then slip

wires through the loop and nipple, into the electric

box. Make sure to provide enough slack in the

wire to ensure weight of fixture is supported by

the chain (I).

5. Using suitable wire connectors (not provided)

connect fixture wires to supply wires (white to

ribbed side of the fixture cord, black to smooth

side). Run a pigtail lead from crossbar ground

screw (A) to the junction box and connect all

ground wires (bare copper or green to bare

copper or green).

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

6. Raise canopy (E) to the ceiling and secure loop collar (F) to canopy loop (G).

7. Follow instructions on next page to install glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

This illustration represents a typical

fixture and ma

not match ever

le.

1 2

A298 1
27015 Rev A 1

Summary of Contents

Page 1 - 27015 Rev A

Installation Instructions A298 Flora Chandeliers 10-3045 & 103047 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route

Page 2

Installation Instructions A298 Flora Chandeliers 10-3045 & 103047 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories 154 Route

Related models: 103045

Comments to this Manuals

No comments

Hubbardton-forge 103047 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 103047. Hubbardton Forge 103047 User Manual

Summary of Contents

Related models: 103045

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 103047