Hubbardton-forge 204825 User Manual download pdf (Page 1)

Installation Instructions B170

For Sconce 20-4825 & 20-4825E Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22659

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Barrel Knob (2)

D Fixture Assembly

E Ground Screw

F Bracket

G 8-32 Screw (2)

Caution: Be sure power is off at the main breaker box prior to installation.

1. Carefully unpack the fixture from the carton.

2. Remove bracket (F) by loosening and removing the two

8-32 screws (G). Set to the side for later use.

Note: This is only necessary for the shade option.

Using two machine screws (not provided), fasten the

crossbar (A) to the electric box making sure that fixture

mounting holes are level.

Note: A new electric box comes with screws. When

replacing a fixture, retain the existing screws for use

with the new fixture.

4. Thread studs (B) into the appropriate holes in the crossbar

(A). Adjust the studs to proper length to ensure the fixture

will fit snugly to the wall.

5. Hold the fixture assembly (D) close to the wall and using

suitable wire connectors, not provided, connect fixture

wires to supply (white to white or ribbed and black to

black or smooth). Connect all ground wires to ground

screw.

Caution: Make sure wire connectors are twisted on

securely, and no bare wire is exposed.

6. Slide fixture assembly (D) over threaded studs (B) and

push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with barrel knobs (C).

Be sure threaded studs (B) are fully seated in the barrel

knobs (C).

7. See instructions on next page to install glass or shade depending on option purchased.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2 3

B170 1
22659 1

Summary of Contents

Page 1 - 22659

Installation Instructions B170 For Sconce 20-4825 & 20-4825E Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827,

Page 2

Installation Instructions B170 For Sconce 20-4825 & 20-4825E Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827,

Page 3

Installation Instructions B170 For Sconce 20-4825 & 20-4825E Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827,

Comments to this Manuals

No comments

Hubbardton-forge 204825 User Manual Page 1

Browse online or download User Manual for Lighting Hubbardton-forge 204825. Hubbardton Forge 204825 User Manual

Summary of Contents

Comments to this Manuals

Hubbardton-forge 204825 User Manual Page 1

Browse online or download User Manual for Lighting Hubbardton-forge 204825. Hubbardton Forge 204825 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 204825