Hubbardton-forge 207650 User Manual download pdf

Installation Instructions B222

For Brindille Sconce 20-7650 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26509

For fixtures requiring assembly, please refer to assembly instructions before installation.

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud (2)

C Knurled Balls (2)

D Fixture Assembly

E Ground Screw

Caution: Be sure power is off at the

main breaker box prior to installation.

1. Carefully unpack the fixture

from the carton.

2. Using two machine screws (not

provided), fasten the crossbar

(A) to the electric box making

sure that fixture mounting holes

are level.

Note: A new electric box comes

with screws. When replacing a

fixture, retain the existing screws

for use with the new fixture.

3. Thread studs (B) into the

appropriate holes in the crossbar

(A). Adjust the studs to proper length to ensure the fixture will fit snugly to the wall.

4. Hold the fixture assembly (D) close to the wall and using suitable wire connectors, not provided, connect fixture

wires to supply (white to white or ribbed and black to black or smooth). Run a pigtail lead from crossbar ground

screw (E) to the junction box and connect all ground wires (bare copper or green to bare copper or

green).

Caution: Make sure wire connectors are twisted on securely, and no bare wire is exposed.

5. Slide fixture assembly (D) over threaded studs (B) and push firmly to wall, making sure that no wires are pinched

between fixture back and wall. Fasten with knurled balls (C). Be sure threaded studs (B) are fully seated in the

knurled balls (C).

6. See instructions on next page to install shade.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

B222 1
26509 1

Summary of Contents

Page 1 - 26509

Installation Instructions B222 For Brindille Sconce 20-7650 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rou

Page 2

Installation Instructions B222 For Brindille Sconce 20-7650 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Rou

Comments to this Manuals

No comments

Hubbardton-forge 207650 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 207650. Hubbardton Forge 207650 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 207650