If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
HUBBARDTONFORGE.COM
-, -
154 RT. 30 SOUTH
•
CASTLETON, VERMONT 05735
All designs and images ©1989-2014 Hubbardton Forge
®
. All rights reserved.
19838 Rev C
Assembly & Installation Instructions
To Assemble Fixture (Figures 3 & 4)
Component Parts
H Fixture Pipe
I Socket Assembly
J Set Screw (3)
K Clutch
L Clutch Sleeve
M Canopy Pipe
1. Thread the wires from the xture pipe (H) into and through
the canopy pipe (M) and up through the canopy (O). Un-
screw the clutch (K) from the canopy pipe (M); slide it
across the wires and onto the xture pipe (H). Follow this
with the clutch sleeve (L), so that the clutch sleeve nests
inside the clutch.
Important: To ensure full connection strength, be sure the tapered
end of the plastic clutch sleeve is oriented toward the clutch when
assembled and securely tighten set screw (Figure 4).
Slide the xture pipe (H) as far as necessary to give you
the total length of the xture which you desire. Be careful
not to scratch the pipe surfaces and to pull excess wire up
through the canopy (O). There must be a minimum 1-1/2"
of inner pipe inside the outer pipe. Screw clutch (K) on to
canopy pipe (M) and hand-tighten the clutch to temporarily
hold this adjustment.
At this point the clutch is not securely fastened; do not de-
pend on it to permanently hold the xture.
To Install Fixture
Component Parts
CAUTION: BE SURE POWER IS OFF AT THE MAIN BREAKER BOX
PRIOR TO INSTALLATION.
1. Thread studs (P) through appropriate holes in the
crossbar (R) to match hole centers on canopy (O).
Using two machine screws fasten the crossbar to the
electric box using outer oval slots to orient xture to
desired hanging position.
Note: A new electric box comes with screws. When
replacing a xture, retain the existing screws for use
with the new xture.
A113
For Adjustable Shade Pendant Model 139610
Page 2 of 4
R
Q
P
(Continued)
O
N
N Barrel Knobs (3)
O Canopy
P Threaded Studs (3)
Q Ground Screw
R Crossbar
(Figure 3)
(Figure 4)
M
L
K
J
H
I
LARGE DIAMETER PIPE
TAPPERED END OF
PLASTIC SLEEVE
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals