Hubbardton-forge 18725 User Manual download pdf

Assembly & Installation Instructions A336

Apparatus Pendant 18725 Page 1 of 3

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

28310

To Assemble Fixture (Figures 1 & 2)

Component Parts

A Fixture pipe

B Canopy

C Canopy pipe

D Clutch sleeve

E Clutch

F Set Screw

1. Carefully unpack the fixture from the carton.

2. Slip the wires from the fixture pipe (A) into and through the canopy

pipe (C) up through the canopy (B).

3. Unscrew the clutch (E) from the canopy pipe (C); slide it across the

wires and onto the fixture pipe (A). Follow this with the plastic

clutch sleeve (D), oriented so the tapered end of the clutch sleeve

nests in the clutch (Figure 2).

4. Slide the canopy pipe (C) as far as necessary to give you the total

length of the fixture which you desire. Be careful not to scratch the

pipe surfaces and to pull excess wire up through the canopy pipe (C).

Screw clutch (E) onto canopy pipe (C). There must be a minimum

1-1/2" of inner pipe inside the outer pipe. Hand-tighten the clutch to

temporarily hold this adjustment. The clutch is not securely fastened

at this point; do not depend on it to hold the fixture.

Important: To ensure full connection strength, be sure the tapered

end of the plastic clutch sleeve is oriented toward the clutch when

assembled and securely tighten set screw (Figure 2).

5. Stop. Please see installation instructions on next page.

6. Once the fixture is fastened to the ceiling, tighten the set screw (F)

firmly with hex wrench provided. Only after the set screw (F) is tight

should you install the glass.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

(Figure 2)

(Figure 1)

1 2 3

A336 1
28310 1

Summary of Contents

Page 1 - 28310

Assembly & Installation Instructions A336 Apparatus Pendant 18725 Page 1 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 15

Page 2

Assembly & Installation Instructions A336 Apparatus Pendant 18725 Page 2 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 15

Page 3

Assembly & Installation Instructions A336 Apparatus Pendant 18725 Page 3 of 3 Hand-Forged, Vermont-Made Lighting and Accessories 15

Comments to this Manuals

No comments

Hubbardton-forge 18725 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 18725. Hubbardton Forge 18725 User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 18725