Hubbardton-forge 132200 User Manual download pdf

Assembly & Installation Instructions A111

For Trestle Four-Light Pendant 13-2200 Page 1 of 4

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

19830

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Stem Assembly (Figure 1)

Component Parts

A Fixture Pipe

B Fixture Coupling

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture

wires.

3. Apply a drop of the supplied thread locking compound to the internal

threads at the top of the fixture coupling (B) and screw stem into

fixture, being careful not to twist the wires.

Note: Application of the thread locking compound is necessary to

prevent the stem from loosening during regular maintenance and

cleaning of the fixture. Be certain to apply the compound.

4. See instructions below to complete the installation.

(Figure 1)

To Complete Assembly

(Figures 2 & 3)

Component Parts

A Fixture Pipe

C Hex Head Nipple

D Crossbar

E Threaded Stud

F Canopy

G Knurl Ball

H Canopy Pipe

I Plastic Clutch Sleeve

J Clutch

K Set Screw (2)

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread the wires from the fixture pipe (A) into and

through the canopy pipe (H) up through the canopy (F).

2. Unscrew the clutch (J) from the canopy pipe (H); slide it

across the wires and onto the fixture pipe (A). Follow this

with the plastic clutch sleeve (I), oriented so the tapered

end of the clutch sleeve nests in the clutch.

3. Slide the canopy pipe (H) as far as necessary to give you

the total length of the fixture which you desire. Be careful

not to scratch the pipe surfaces and to pull excess wire up

through the canopy pipe (H). Screw clutch (J) onto canopy

pipe (H). There must be a minimum 1-1/2" of inner pipe

inside the outer pipe. Hand-tighten the clutch to

temporarily hold this adjustment. The clutch is not securely

fastened at this point; do not depend on it to hold the fixture.

Important: To ensure full connection strength, be sure the tapered end of the plastic clutch sleeve is oriented

toward the clutch when assembled and securely tighten set screw (Figure 2).

(Figure 2)

(continued)

1 2 3 4

A111 1
19830 1

Summary of Contents

Page 1 - 19830

Assembly & Installation Instructions A111 For Trestle Four-Light Pendant 13-2200 Page 1 of 4 Hand-Forged, Vermont-Made Lighting and Accessor

Page 2

Assembly & Installation Instructions A111 For Trestle Four-Light Pendant 13-2200 Page 2 of 4 Hand-Forged, Vermont-Made Lighting and Accessor

Page 3

Assembly & Installation Instructions A111 For Trestle Four-Light Pendant 13-2200 Page 3 of 4 Hand-Forged, Vermont-Made Lighting and Accessor

Page 4

Assembly & Installation Instructions A111 For Trestle Four-Light Pendant 13-2200 Page 4 of 4 Hand-Forged, Vermont-Made Lighting and Accessor

Comments to this Manuals

No comments

Hubbardton-forge 132200 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 132200. Hubbardton Forge 132200 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 132200