Hubbardton-forge 104305 User Manual download pdf (Page 1)

Installation Instructions A266

For Constellation Chandelier 10-4303 & 10-4305 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

24838

To Install the Canopy (Figure 1)

Component Parts

A Ground Screw

B Crossbar

C Lock Nut

D Nipple

E Canopy

F Loop Collar

G Canopy Loop

H Fixture Loop

I Chain

Caution: Be sure power is off at the main breaker box prior to installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar (B) to

the electric box (see illustration).

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Thread the nipple (D) into the crossbar (B) and secure with lock nut

(C); slide canopy (E) over nipple (D), and attach the canopy loop (G)

to the nipple (D). Adjust the nipple to proper length to ensure a snug

canopy fit before proceeding.

4. Attach one end of the chain (I) to the fixture loop (H). Lace the wire

through every other link of the chain (I) to the end. Slip wires and

chain (I) through the collars and canopy (G, F & E). Fasten the chain

(I) to the canopy loop (G), then slip wires through the loop and nipple,

into the electric box. Make sure to provide enough slack in the wire to

ensure weight of fixture is supported by the chain (I).

5. Using suitable wire connectors (not provided) connect fixture wires to

supply wires (white to ribbed side of the fixture s cord, black to

smooth side). Run a pigtail lead from crossbar ground screw (A) to the

junction box and connect all ground wires (bare copper or green to

bare copper or green).

Caution: Make sure wire connectors are twisted on securely, and no

bare wire is exposed.

6. Raise canopy (E) to the ceiling and secure loop collar (F) to canopy

loop (G).

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

This illustration represents a typical

fixture and may not match every style.

1 2

A266 1
24838 1

Summary of Contents

Page 1 - 24838

Installation Instructions A266 For Constellation Chandelier 10-4303 & 10-4305 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Page 2

Installation Instructions A266 For Constellation Chandelier 10-4303 & 10-4305 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessories

Comments to this Manuals

No comments

Hubbardton-forge 104305 User Manual Page 1

Browse online or download User Manual for Lighting Hubbardton-forge 104305. Hubbardton Forge 104305 User Manual [en] [es] [fr]

Summary of Contents

Comments to this Manuals

Hubbardton-forge 104305 User Manual Page 1

Browse online or download User Manual for Lighting Hubbardton-forge 104305. Hubbardton Forge 104305 User Manual [en] [es] [fr]

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 104305