Hubbardton-forge 213256 User Manual download pdf (Page 2)

Installation Instructions B228

Tapered Angle Sconce 21-3255 & 21-3256 Page 2 of 2

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

26784

To Install Light Bulb and Shield

(Figure 2)

Component Parts

F Socket

G Bulb (included)

H Bulb Shield

1. Install bulb (G). Be careful not to touch bulb with bare hands; oil from the hands

will dramatically reduce bulb life.

2. Place bulb shield (H) over bulb (G) and thread onto socket (F). Be careful not to

over tighten.

To Attach Decorative Face Plate

(Figure 3)

Component Parts

D Fixture Assembly

I Decorative Face Plate

1. Attach decorative face plates (I) to the fixture assembly (D) by inserting

the welded rod attaching the two angled plates into the slots and down

into the notches. Be sure the rod is seated into both notches.

2. Restore electricity at main breaker.

Cleaning Instructions

The unique finish on our copper accents is achieved by heating and oxidizing

the surface of the raw copper.

When dusting, gently wipe the surface with a soft damp cloth using a spray wax

if desired. For extra protection and a deep rich finish, a light application of paste

wax once a year is desirable. Never scrub or use an abrasive.

NEVER USE AMMONIA OR SOLVENT-BASED CLEANING

PRODUCTS ON THE COPPER SURFACE.

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased

this product. We hope you enjoy your fixture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

(Figure 2)

(Figure 3)

1 2

No comments

Hubbardton-forge 213256 User Manual Page 2