Hubbardton-forge 206730 User Manual download pdf

Installation Instructions B81

Forged Vertical Bar 20-6729, 206729F & 20-6730, 20-6730F Page 1 of 1

Hand-Forged, Vermont-Made Lighting and Accessories

154 Route 30 South, Castleton, Vermont 05735

19421

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall & Install Glass (Figure 1)

Component Parts

A Glass F Ground Screw

B Top Adjusting Nut G Mounting Screw (2)

C Bent Bracket (top) H Bottom Adjusting Nut

D Textured Bar I Bent Bracket (bottom)

E Crossbar J Support Bar

Caution: Be sure power is off at the main breaker box prior to

installation

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar

(E) to the electric box making sure that fixture mounting holes

are level.

Note: A new electric box comes with screws. When

replacing a fixture, retain the existing screws for use with the

new fixture.

3. Hold the fixture assembly close to the wall and using suitable

wire connectors, not provided, connect fixture wires to supply

(white to white or ribbed and black to black or smooth). Run a

pigtail lead from crossbar ground screw (F) to the junction box

and connect all ground wires (bare copper or green to bare

copper or green).

Caution: Make sure wire connectors are twisted on securely,

and no bare wire is exposed.

4. Push fixture assembly firmly to wall, making sure that no

wires are pinched between fixture back and wall. Fasten

fixture assembly to Crossbar (E) with mounting screws (G) until

the fixture is tight against the wall.

5. Install light bulb(s) (included on F version only)

6. Orient the two bent brackets to a horizontal position

7. Slide glass (A) down into fixture, positioned between the bent bracket (C & J) and textured bar (D), until it rests

on the support bar (K). It may be necessary to rotate one or both adjusting nuts clockwise for glass to fit.

8. Rotate bottom adjusting nut (I) counter clockwise until glass (A) is snug against textured bar (D). Do not over

tighten as glass may crack. Rotate top adjusting nut (B) counter clockwise until glass (A) is snug. Do not over

tighten

9. Restore electricity at main breaker

If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased

this product. We hope you enjoy your fixture!

Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR

DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

19421 1

Summary of Contents

Page 1 - 19421

Installation Instructions B81 Forged Vertical Bar 20-6729, 206729F & 20-6730, 20-6730F Page 1 of 1 Hand-Forged, Vermont-Made Lighting and Acce

Related models: 206729

Comments to this Manuals

No comments

Hubbardton-forge 206730 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 206730. Hubbardton Forge 206730 User Manual [en]

Summary of Contents

Related models: 206729

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 206730