Hubbardton-forge 18660 User Manual download pdf

Assembly & Installation Instructions A187

For Pendant 18-660 & 18-660F Page 1 of 4

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

22263 Rev A

Stem Assembly (Figure 1)

Component Parts

A Fixture Pipe

B Fixture Coupling

1. Carefully unpack the fixture from the carton.

2. Carefully thread fixture pipe (A), threaded end first, over fixture wires.

3. Apply a drop of the supplied thread locking compound to the internal threads

of the fixture coupling (B) and screw stem into fixture, being careful not to

twist the wires.

Note: Application of the thread locking compound is necessary to prevent

the stem from loosening during regular maintenance and cleaning of the

fixture. Be certain to apply the compound.

4. See instructions below to complete the installation.

Prepare the Canopy

(Figure 2)

Component Parts

C Jam Nut (2)

D Crossbar

E Threaded Nipple

F Canopy

G Canopy Ring

H Coupling

I Canopy Pipe

Caution: Be sure power is off at the main breaker box prior to installation.

1. Thread Jam Nut (C) and Crossbar (D) onto threaded nipple (E) leave both

parts loose.

2. Using two machine screws (not provided), temporarily fasten the crossbar

(D) to the electric box.

Note: A new electric box comes with screws. When replacing a fixture,

retain the existing screws for use with the new fixture.

3. Adjust the length of Threaded Nipple (E) in crossbar (D) so that Canopy

Ring (G) will hold Canopy (F) against the ceiling with no threads showing

for best appearance. When the correct adjustment is established, tighten

Jam Nut (C) against crossbar (D) to hold the adjustment.

4. Remove the crossbar and stem from the electrical box and proceed with the

assembly instructions.

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 2)

1 2 3 4

A187 1
22263 Rev A 1

Summary of Contents

Page 1 - 22263 Rev A

Assembly & Installation Instructions A187 For Pendant 18-660 & 18-660F Page 1 of 4 Hand-Forged, Vermont-Made Lighting and Accessorie

Page 2

Assembly & Installation Instructions A187 For Pendant 18-660 & 18-660F Page 2 of 4 Hand-Forged, Vermont-Made Lighting and Accessorie

Page 3

Assembly & Installation Instructions A187 For Pendant 18-660 & 18-660F Page 3 of 4 Hand-Forged, Vermont-Made Lighting and Accessorie

Page 4

Assembly & Installation Instructions A187 For Pendant 18-660 & 18-660F Page 4 of 4 Hand-Forged, Vermont-Made Lighting and Accessorie

Comments to this Manuals

No comments

Hubbardton-forge 18660 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 18660. Hubbardton Forge 18660 User Manual [en]

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 18660