Hubbardton-forge 124555 User Manual download pdf

Assembly & Installation Instructions A115

For Compass Semi-Flush 12-4555 Page 1 of 2

Hand-Forged, Vermont-Made Lighting and Accessorie

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

19841 Rev B

Install the Canopy (Figure 1)

Component Parts

A Crossbar

B Ground Screw

C Hex Nut (2)

D Threaded Nipple

E Coupling

F Canopy

G Canopy Ring

H Socket Assembly

Caution: Be sure power is off at the main breaker box prior to installation.

1. Slip canopy ring (G) large diameter first over threaded nipple (D)

and thread on and over coupling (E) followed by canopy (F)

coming to rest on socket assembly (H).

2. Thread hex nuts (C) and crossbar (A) onto threaded nipple (D)

leave parts loose.

3. Using two machine screws (not provided) fasten the crossbar (A) to

the electric box.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

4. Adjust the length of threaded nipple (D) in crossbar (A) so that

canopy ring (G) will hold canopy (F) against the ceiling with no

threads showing for best appearance. When the correct adjustment

is established, tighten hex nuts (C) against crossbar (A) to hold the

adjustment.

5. Loosen canopy ring (G) from coupling (E) and lower canopy ring

(G) and canopy (F) until they rest on top of socket

assembly (H).

6. Using suitable wire connectors (not provided) connect fixture wires

to supply wires (white to white or ribbed and black to black or

smooth. Connect all ground wires to green ground screw (B). Push

wires back into outlet box.

Caution: Make sure wire connectors are twisted on securely, and

no bare wire is exposed.

(continued)

(Figure 1)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

(Figure 1)

1 2

Page 2 of 2 2

Summary of Contents

Page 1

Assembly & Installation Instructions A115 For Compass Semi-Flush 12-4555 Page 1 of 2 Hand-Forged, Vermont-Made Lighting and Accessorie

Page 2 - Page 2 of 2

Assembly & Installation Instructions A115 For Compass Semi-Flush 12-4555 Page 2 of 2 Hand-Forged, Vermont-Made Lighting and Accessorie

Comments to this Manuals

No comments

Hubbardton-forge 124555 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 124555. Hubbardton Forge 124555 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 124555