Hubbardton-forge 204670 User Manual download pdf

Assembly & Installation Instructions B113

Hand-Forged, Vermont-Made Lighting and Accessories

P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735

19785 Rev B

For Wall Sconce 20-4670 Page 1 of 2

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

To Mount Fixture to Wall (Figure 1)

Component Parts

A Crossbar

B Threaded Stud

C Flat Head Screw

D Barrel Knob

E Fixture Assembly

Caution: Be sure power is off at the main breaker box prior to

installation.

1. Carefully unpack the fixture from the carton.

2. Using two machine screws (not provided), fasten the crossbar

(B) to the electric box making sure that fixture mounting holes

are level.

Note: A new electric box comes with screws. When replacing a

fixture, retain the existing screws for use with the new fixture.

3. Thread stud (B) into the appropriate hole in the crossbar (A).

Adjust the stud to proper length to ensure the fixture will fit

snugly to the wall.

4. Hold the fixture assembly (E) close to the wall and using suitable

wire connectors (not provided) connect fixture wires to supply

wires (white to white, black to black, and bare copper or green to

bare copper or green).

Caution: Make sure wire connectors are twisted on securely,

and no bare wires are exposed.

5. Slide fixture assembly (E) over threaded stud (B) and push

firmly to wall, making sure that no wires are pinched between

fixture back and wall. Fasten with barrel knob (D). Be sure

threaded stud (B) is fully seated in the barrel knob (D).

6. Thread flat head screw (C) in crossbar (A).

7. See instructions next page to install glass.

8. Install bulb.

9. Restore electricity at main breaker.

(continued)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum watta

e noted on fixture. Use onl

recommended bulbs with fixture.

(Figure 1)

1 2

B113 1
19785 Rev B 1

Summary of Contents

Page 1 - 19785 Rev B

Assembly & Installation Instructions B113 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30 South, Castleton, Ver

Page 2

Assembly & Installation Instructions B113 Hand-Forged, Vermont-Made Lighting and Accessories P.O. Box 827, 154 Route 30 South, Castleton, Ver

Comments to this Manuals

No comments

Hubbardton-forge 204670 User Manual

Browse online or download User Manual for Lighting Hubbardton-forge 204670. Hubbardton Forge 204670 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Lighting Hubbardton-forge 204670